Search Results

As vehicles become increasingly connected with the external world, they face a growing range of security vulnerabilities. Researchers, hobbyists, and hackers have compromised security keys used by vehicles' electronic control units (ECUs), modified ECU software, and hacked wireless transmissions from vehicle key fobs and tire monitoring sensors. Malware can infect vehicles through Internet connectivity, onboard diagnostic interfaces, devices tethered wirelessly or physically to the vehicle, malware-infected aftermarket devices or spare parts, and onboard Wi-Fi hotspot. Once vehicles are interconnected, compromised vehicles can also be used to attack the connected transportation system and other vehicles. Securing connected vehicles impose a range of unique new challenges. This paper describes some of these unique challenges and presents an end-to-end cloud-assisted connected vehicle security framework that can address these challenges.

This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.

In order to enhance customer experience [5] and to reduce time to market, the manufacturers are constantly in need of being able to update software/firmware of the Electronic Control units (ECU) when the vehicle is in field operations. The updates could be a bug fix or a new feature release. Until the recent years, the updation of software/firmware used to be done using a physical hardwired connection to the Vehicle in a workshop. However, with the element of connectivity being added to the vehicle, the updation of software can be done remotely and wirelessly over the air using a feature called Flash over the air (FOTA) [2] and Software over the air (SOTA) [2]. In order to safeguard the telematics [3] ECU from tampering or hacking, the manufacturers are doing away with the ports on the underlying hardware through which manual flashing used to be done. This means that, the only option available to flash or update the ECU is using FOTA/SOTA.

Abstract Secure boot is a fundamental security primitive for establishing trust in computer systems. For real-time safety applications, the time taken to perform the boot measurement conflicts with the need for near instant availability. To speed up the boot measurement while establishing an acceptable degree of trust, we propose a dual-phase secure boot algorithm that balances the strong requirement for data tamper detection with the strong requirement for real-time availability. A probabilistic boot measurement is executed in the first phase to allow the system to be quickly booted. This is followed by a full boot measurement to verify the first-phase results and generate the new sampled space for the next boot cycle. The dual-phase approach allows the system to be operational within a fraction of the time needed for a full boot measurement while producing a high detection probability of data tampering.

Abstract Secure boot, although known for more than 20 years, frequent attacks from hackers that show numerous ways to bypass the security mechanism, including electronic control units (ECUs) of the automotive industry. This paper investigates the major causes of security weaknesses of secure boot implementations. Based on penetration test experiences, we start from an attacker’s perspective to identify and outline common implementation weaknesses. Then, from a Tier-One perspective, we analyze challenges in the research and development process of ECUs between original equipment manufacturers (OEMs) and suppliers that amplify the probability of such weakness. The paper provides recommendations to increase the understanding of implementing secure boot securely on both sides and derives a set of reference requirements as a starting point for secure boot ECU requirements.

We propose a security-testing framework to analyze attack feasibilities for automotive control software by integrating model-based development with model checking techniques. Many studies have pointed out the vulnerabilities in the Controller Area Network (CAN) protocol, which is widely used in in-vehicle network systems. However, many security attacks on automobiles did not explicitly consider the transmission timing of CAN packets to realize vulnerabilities. Additionally, in terms of security testing for automobiles, most existing studies have only focused on the generation of the testing packets to realize vulnerabilities, but they did not consider the timing of invoking a security testing. Therefore, we focus on the transmit timing of CAN packets to realize vulnerabilities. In our experiments, we have demonstrated the classification of feasible attacks at the early development phase by integrating the model checking techniques into a virtualized environment.

Abstract The automotive industry intends to create new services that involve sharing vehicle control information via a wide area network. In modern vehicles, an in-vehicle network shares information between more than 70 electronic control units (ECUs) inside a vehicle while it is driven. However, such a complicated system configuration can result in security vulnerabilities. The possibility of cyber-attacks on vehicles via external services has been demonstrated in many research projects. As advances in vehicle systems (e.g., autonomous drive) progress, the number of vulnerabilities to be exploited by cyber-attacks will also increase. Therefore, future vehicles need security measures to detect unknown cyber-attacks. We propose anomaly-based intrusion detection to detect unknown cyber-attacks for the Control Area Network (CAN) protocol, which is popular as a communication protocol for in-vehicle networks.

Recent developments in the commercialization of mobility services have brought unprecedented connectivity to the automotive sector. While the adoption of connected features provides significant benefits to vehicle owners, adversaries may leverage zero-day attacks to target the expanded attack surface and make unauthorized access to sensitive data. Protecting new generations of automotive controllers against malicious intrusions requires solutions that do not depend on conventional countermeasures, which often fall short when pitted against sophisticated exploitation attempts. In this paper, we describe some of the latent risks in current automotive systems along with a well-engineered multi-layer defense strategy. Further, we introduce a novel and comprehensive attack and performance test framework which considers state-of-the-art memory corruption attacks, countermeasures and evaluation methods.

Abstract Connecting vehicles to various network services increases the risk of in-vehicle cyberattacks. For automotive industries, the supply chain for assembling a vehicle consists of many different organizations such as component suppliers, system suppliers, and car manufacturers (CMs). Moreover, once a vehicle has shipped from the factory of the CM, resellers, dealers, and owners of the vehicle may add and replace the optional authorized and third-party equipment. Such equipment may have serious security vulnerabilities that may be targeted by a malicious attacker. The key management system of a vehicle must be applicable to all use cases. We propose a novel key management system adaptable to the electronic control unit (ECU) lifecycle of a vehicle. The scope of our system is not only the vehicle product line but also the third-party vendors of automotive accessories and vehicle maintenance facilities, including resellers, dealers, and vehicle users.

Cyber security is becoming increasingly critical in the car industry. Not only the entry points to the external world in the car need to be protected against potential attack, but also the on-board communication in the car require to be protected against attackers who may try to send unauthorized CAN messages. However, the current CAN network was not designed with security in mind. As a result, the extra measures have to be taken to address the key security properties of the secure CAN communication, including data integrity, authenticity, confidentiality and freshness. While integrity and authenticity can be achieved by using a relatively straightforward algorithms such as CMAC (Cipher-based Message Authentication Code) and Confidentiality can be handled by a symmetric encryption algorithm like AES128 (128-bit Advanced Encryption Standard), it has been recognized to be more challenging to achieve the freshness of CAN message.

Abstract Designers of automotive systems find themselves pulled in an impossible number of directions. Systems must use the most advanced security features, but at the same time run on low-cost and resource-constrained hardware. Ultimately, an engineering trade-off will eventually be made regarding how encryption and key management is used on these systems, potentially leaving them vulnerable to attack. In this paper, we detail the applicability of side-channel power analysis and fault injection on automotive electronic systems, showing how these dangerous techniques can be used to break an otherwise secure system. We build a small example network using AES-CCM to implement an encrypted, authenticated CAN protocol. We demonstrate how open-source hardware and software can easily recover the encryption keys from some of these nodes with side-channel power analysis, and we recover a full firmware image from one device with a fault-injection attack using the same tools.

Abstract The secure boot has successfully protected systems from executing untrusted software (SW), but low-power controllers lack sufficient time to check every memory cell while satisfying real-time functional safety requirements. Automotive controllers need to maintain security through multiple cycles of remote, unsupervised operation and safely reach a secure state when an anomaly is detected. To accelerate the boot time, we propose Sliced Secure Boot: build fingerprints by slicing orthogonally through memory blocks, protect each cell with a reusable fingerprint using a reproducible pattern with sufficient entropy, and randomly check one fingerprint pattern during boot. We do not claim that sampling offers equivalent protection to exhaustive checks but demonstrate that careful sampling can provide a sufficient level of detection while maintaining compatibility with both startup time and functional safety requirements.

CAN bus network proved to be efficient and dynamic for small compact cars as well as heavy-duty vehicles (HDV). However, HDVs are more susceptible to malicious attacks due to lack of security in their intra-vehicle communication protocols. SAE proposed a new standard named J1939-91C for CAN-FD networks which provides methods for establishing trust and securing mutual messages with optional encryption. J1939-91C ensures message authenticity, integrity, and confidentiality by implementing complex cryptographic operations including hash functions and random key generation. In this paper, the three main phases of J1939-91C, i.e., Network Formation, Rekeying, and Message Exchange, are simulated and tested on Electronic Control Units (ECUs) supporting CAN-FD network. Numerous test vectors were generated and validated to support SAE J1939-91C. The mentioned vectors were produced by simulating different encryption and hashing algorithms with variable message and key lengths.

This SAE Information Report J2931/7 establishes the security requirements for digital communication between Plug-In Electric Vehicles (PEV), the Electric Vehicle Supply Equipment (EVSE) and the utility, ESI, Advanced Metering Infrastructure (AMI) and/or Home Area Network (HAN).

Access mechanisms to system data and/or control is a primary use case of the hardware protected security environment (hardware protected security environment) during different uses and stages of the system. The hardware protected security environment acts as a gatekeeper for these use cases and not necessarily as the executor of the function. This section is a generalization of such use cases in an attempt to extract common requirements for the hardware protected security environment that enable it to be a gatekeeper. Examples are: Creating a new key fob Re-flashing ECU firmware Reading/exporting PII out of the ECU Using a subscription-based feature Performing some service on an ECU Transferring ownership of the vehicle Some of these examples are discussed later in this section and some have detailed sections of their own. This list is by no means comprehensive.

Abstract Modern vehicles integrate Internet of Things (IoT) components to bring value-added services to both drivers and passengers. These components communicate with the external world through different types of interfaces including the on-board diagnostics (OBD-II) port, a mandatory interface in all vehicles in the United States and Europe. While this transformation has driven significant advancements in efficiency and safety, it has also opened a door to a wide variety of cyberattacks, as the architectures of vehicles were never designed with external connectivity in mind, and accordingly, security has never been pivotal in the design. As standardized, the OBD-II port allows not only direct access to the internal network of the vehicle but also installing software on the Electronic Control Units (ECUs).

Abstract In the automotive domain, the overall complexity of technical components has increased enormously. Formerly isolated, purely mechanical cars are now a multitude of cyber-physical systems that are continuously interacting with other IT systems, for example, with the smartphone of their driver or the backend servers of the car manufacturer. This has huge security implications as demonstrated by several recent research papers that document attacks endangering the safety of the car. However, there is, to the best of our knowledge, no holistic overview or structured description of the complex automotive domain. Without such a big picture, distinct security research remains isolated and is lacking interconnections between the different subsystems. Hence, it is difficult to draw conclusions about the overall security of a car or to identify aspects that have not been sufficiently covered by security analyses.

With the development of vehicle intelligence and the Internet of Vehicles, how to protect the safety of the vehicle network system has become a focus issue that needs to be solved urgently. The Controller Area Network (CAN) bus is currently a very widely used vehicle-mounted bus, and its security largely determines the degree of vehicle-mounted information security. The CAN bus lacks adequate protection mechanisms and is vulnerable to external attacks such as replay attacks, modifying attacks, and so on. On the basis of the existing work, this paper proposes an authentication method that combines Hash-based Message Authentication Code (HMAC)-SHA256 and Tiny Encryption Algorithm (TEA) algorithms. This method is based on dynamic identity authentication in challenge/response made and combined with the characteristics of the CAN bus itself as it achieves the identity authentication between the gateway and multiple electronic control units (ECUs).

Vehicles have more connectivity options now-a-days and these increasing connection options are giving more chances for an intruder to exploit the system. So, the vehicle manufacturers need to make the ECU in the vehicle more secure. To make the system secure, the embedded system must secure all the assets in the system. Examples of assets are Software, Kernel or Operating system, cryptographic Keys, Passwords, user data, etc. In this, securing the Kernel is extremely important as an intruder can even exploit the operating system characteristics just by changing the kernel code without introducing a trojan in the system. Also, the Kernel is the one entity that manages all permissions, so, if the kernel is hacked, these permissions also get compromised. The proposed approach is to make the kernel secure by doing the integrity check periodically of the kernel code loaded into the main memory of the system.

The new generation vehicles these days are managed by networked controllers. A large portion of the networks is planned with more security which has recently roused researchers to exhibit various attacks against the system. This paper talks about the liabilities of the Controller Area Network (CAN) inside In-vehicle communication protocol and a few potentials that could take due advantage of it. Moreover, this paper presents a few security measures proposed in the present examination status to defeat the attacks. In any case, the fundamental objective of this paper is to feature a comprehensive methodology known as Intrusion Detection System (IDS), which has been a significant device in getting network data in systems over many years. To the best of our insight, there is no recorded writing on a through outline of IDS execution explicitly in the CAN transport network system.